1oz Silver Copper storage box container 1oz bars stackers in capsules - 10 Slot

10 SLOT 1 OZ SILVER BAR / STACKER STORAGE BOX
(because bars deserve their own little parking spaces too)

Keep Your Bars Organized, Protected, and Ready to Store. Designed and 3D printed by Frozen Forge, this storage box is purpose-built for 1 oz silver bars and stackers stored in capsules.

It holds up to 10 encapsulated bars vertically in individual slots and is designed to accommodate Air-Tite and many similarly sized generic square capsules.

DETAILS

• Brand: Frozen Forge
• Type: Bar / Bullion Storage Box
• Capacity: 10 capsules
• Designed For: 1 oz silver bars and stackers in capsules
• Compatible With: Air-Tite and many similarly sized square capsules
• Material: PLA / PLA+ – 3D Printed
• Lid: Removable friction-fit lid
• Color: See available color list below
• Made In: USA

FIT / COMPATIBILITY

This box is designed for encapsulated 1 oz bars and stackers.

Common uses include:

• 1 oz silver bars in capsules
• 1 oz silver stackers in capsules
• Engelhard bars in compatible capsules
• Generic 1 oz silver bars
• 1 oz copper bars and stackers
• Other similarly sized encapsulated bullion

Air-Tite capsules are recommended, but many similarly sized generic square capsules may also fit.

IMPORTANT: Fit is based on the outside dimensions of the capsule, not simply the weight or size of the bar inside.Capsule dimensions can vary between manufacturers, so specialty or unusually sized capsules are not guaranteed to fit.

If you are unsure whether your capsules will fit, send us a message before ordering.

FEATURES

• Holds up to 10 encapsulated 1 oz bars or stackers
• Individual slots keep capsules separated and organized
• Compact, stackable design
• Snug friction-fit lid
• 3D printed in-house by Frozen Forge
• Small-batch production
• Printed low and slow for a cleaner, more consistent finish

AVAILABLE COLORS

Charcoal Black (Matte/Default), Dark Black, White, Grey, Blue Grey, Brown, Skin/Nude, Light Oak, Dark Blue, Galaxy Blue, Teal Blue, Tiffany Blue, Royal Blue, Slate Marble Blue, Firefly Blue, Bright Red, Firehose Red, Dark Red, Maroon Red, Easter Green, Lime Green, Highlighter Green (Scallion), Grass Green, Army Green, Hunter/Forest Green, Morandi Green, Orange, Yellow, Highlighter Yellow, Pink, Lilac Purple, Willy Wonka Purple, Dark Purple, Galaxy Purple, Gold, Frosted/Clear, and Glow in the Dark.

Charcoal Black (Matte) is the default unless another color is requested.

Specialty colors may vary slightly between filament batches.

If you want a specific color, please message us before ordering to confirm availability.

ABOUT THE PRINT

This is a 3D-printed product, so normal layer lines, slight surface texture, and a visible print seam may be present. These are normal characteristics of the printing process and are not defects.

We like to say we “cook low and slow.” Why? Because rushing a print to save time usually means sacrificing finish and quality. The Yetis are impatient. We are not.

We photograph our actual products so you can see the finish and construction before purchasing. The box you receive may not be the exact one pictured, but it’ll be about as close as a Yeti can get to you in the woods before you start asking questions.

LID

This box uses a snug friction-fit lid with no clips or latches.

If it feels tight when new, gently wiggle the lid from side to side while pulling upward. A little resistance is intentional and may loosen slightly with use.

CUSTOM CAPACITIES

Need more than 10 slots?

Because these boxes are designed and printed in-house, we can often make other capacities.

Send us a message with what you need and we’ll see what we can do.

IN ALL SERIOUSNESS, PLEASE NOTE

Bars, capsules, and other bullion shown in photos are for display purposes only and are NOT included.

This box is designed for encapsulated 1 oz bars and stackers. Fit depends on the outside dimensions of the capsule being used.

Other capsule brands or specialty holders may not fit.

Colors may vary slightly due to filament batches, lighting, and screen settings.

FROZEN FORGE

Built for collectors. Printed by Yetis. Apparently.

Why Yetis? We just like Yetis. We also really like dogs, and one of ours is named Yeti. At some point the whole thing got out of hand and now they apparently run the printers.

Everything is designed and printed in-house in the USA in small batches. If we wouldn't use it ourselves, it doesn't leave the Forge.